Do Small School Buildings Need Building Regulations Approval?
We are commonly asked for small buildings of up to 30 sq m internal floor area, for uses ranging from sensory pods and outdoor classrooms to storage and break-out spaces. There is a wide understanding that buildings this size can be exempt from the School Building Regulations. That is broadly true, but the detail matters, and so do the obligations that still apply once the exemption has been confirmed.
This guide explains how the exemption works for schools, what it does and doesn't cover, and what to check before you build.
What is the school building regulations Class 6 exemption?
The small detached building exemption sits in Class 6 of Schedule 2 to the Building Regulations 2010, and it applies to schools in England and Wales. Unlike planning permission, which treats domestic and non-domestic sites differently, the Building Regulations exemption turns on the physical characteristics of the building: its size, its position relative to boundaries, and whether anyone can sleep in it. It does not matter whether the site is residential or educational.
School outbuildings: the two size bands
According to LABC guidance on Schedule 2, Class 6, a school outbuilding such as a storage shed, sensory pod or small outdoor classroom is exempt from Building Regulations approval if it meets the following conditions.
Under 15 m² internal floor area. The building must be detached and contain no sleeping accommodation. There are no restrictions on its distance from the site boundary or on the materials used.
Between 15 m² and 30 m² internal floor area. The building must be single-storey, detached and contain no sleeping accommodation. In addition, it must either be sited at least 1 metre from any boundary, or be constructed substantially of non-combustible materials. In practice, a standard timber structure within 1 metre of the school perimeter will not qualify.
Does heating, insulation or electricity void the exemption?
No. Provided the building stays within the 15 m² or 30 m² limits and remains completely detached, adding heating, insulation and electricity does not void the Class 6 exemption. What these additions do is bring in separate compliance duties, which we cover below.
This is a key difference from Class 7 attached extensions such as conservatories and porches, which lose their exemption if you extend the main building's heating into them. A detached Class 6 building is not disqualified for being heated or insulated.
Energy efficiency (Part L)
Stand-alone non-domestic buildings with a total useful floor area under 50 m² are exempt from Part L energy efficiency requirements (see Regulation 21 / Approved Document L on the Planning Portal). Because any Class 6 building is 30 m² or smaller, you do not need to submit SAP or SBEM calculations, U-value checks or air-tightness tests to Building Control.
That said, insulating to modern standards is still well worth doing. It keeps running costs down and makes the space far more comfortable for pupils and staff.
What still applies even when you are exempt?
Exemption from Building Regulations approval is not exemption from everything. For schools in particular, the following still need attention:
Electrical safety
While the building shell is exempt, fixed electrical work is never exempt from safety requirements.
Strictly speaking, Part P of the Regulation 9(3) of the Building Regulations 2010 applies to outbuildings that draw power from a dwelling. If your building is fed from a non-domestic school distribution board, Part P does not technically apply, unless the supply comes from a caretaker's house or other school residential accommodation.
Regardless of Part P, all fixed wiring, armoured cabling, consumer units and fixed electric heaters must comply with BS 7671 (the IET Wiring Regulations) and the Electricity at Work Regulations 1989. We recommend using a qualified commercial electrician, such as an NICEIC or NAPIT approved contractor, who can issue an Electrical Installation Certificate (EIC) for the school's statutory compliance records.
School Premises Regulations
Schools must still ensure that any new space complies with the School Premises (England) Regulations 2012, or the Education (Independent School Standards) Regulations where relevant. These cover matters such as ventilation, lighting, acoustics and welfare facilities for pupils.
Ventilation and overheating
An insulated, airtight timber or modular pod with glazing can overheat quickly in summer and suffer condensation in winter. Because the building will be heated and actively occupied rather than used for cold storage, the design should include adequate background ventilation, such as trickle vents, and openable windows. This is also how you meet the ventilation expectations of the School Premises Regulations.
Fire safety
Under the Regulatory Reform (Fire Safety) Order 2005 and the Fire Safety Act 2021, the school must incorporate the new classroom building into its overall fire risk assessment, escape routes and fire management plan.
Because the building will have fixed heating and electrical equipment, your fire risk assessor will usually expect smoke or heat detection to be linked back to the main school fire alarm panel. Fire-resistant materials may also be appropriate if the building is sited near a boundary.
Planning permission is separate
Being exempt from Building Regulations does not grant planning permission. Schools have their own Permitted Development Rights (under Part 7, Class M of the General Permitted Development Order), which differ from the rules for domestic garden outbuildings. Always verify the planning position with your local planning authority before you commit to a design or a site.
Confirm it in writing
Local authorities occasionally differ on whether a space used for regular teaching is a "small detached building" or part of the school's main educational accommodation. Our advice is to confirm the exemption in writing with your local Building Control body before work starts. It costs little, and it avoids difficult conversations later.
School building regulations: a quick checklist
- Is the building detached, with no sleeping accommodation?
- Is the internal floor area under 30 m², and if it is 15 m² or more, is it single-storey?
- If it is 15 m² or more, is it at least 1 metre from every boundary, or substantially non-combustible?
- Has the electrical installation been designed and certified to BS 7671?
- Does the design meet the School Premises Regulations for ventilation, lighting and acoustics?
- Has the building been added to the school's fire risk assessment, with detection linked to the main panel?
- Have you checked planning status with the local planning authority?
- Have you confirmed the Building Regulations exemption in writing with Building Control?
Talk to Vertis Buildings
If you are considering a small building for your school, we are happy to talk through your requirements, the size and siting options, and the points above. Get in touch with the Vertis Buildings team to discuss your project or check out our blog on how to build a school classroom.
This article is general guidance only and is not a substitute for advice from your local Building Control body, planning authority or a qualified professional.